DeutschControl Panel – from simply practical to highly flexible
Two versions – suitable for every application
HLC by DITABIS ThermoMixers and BlockThermostates can be operated with a high level of user-friendliness – depending on whether a simple or a complex application is performed. Control the complete process with only five key segments and depict your application exactly as you require.
Touch panel in individual colours
The technical up-to-date and stylish touch panel enhances handling and cleaning of the devices and sets new standards in the design of laboratory devices.
The devices are delivered with anthracite front as standard, further colours are possible upon request, e.g. turquoise, brown or white.
- zum Vergrößern anklicken
Simply practical – Easy Control
No complex process sequences required?
Then Easy Control is your perfect partner for the simple and quick handling of your samples.
Select whether the set value or the actual value is to be displayed. The shaking frequency can be set easily and quickly by means of the scaled rotary knob.
With the timer, the process time can be set up to 19 h and 59 minutes. The selected time starts when the set value is reached and the heater switches off at the end of the selected time.
Easy Control is permanently installed and therefore always ready for use.
Parameters for programming
Process time hours: 0-19 h
Process time minutes: 0-59 min
Set temperature: +3°C up to + 130°C
Shaking frequency (at MHR 11):
200 to 1.500 1/min
Infinite possibilities – Smart Control
Program up to 9 complete programs with 30 program steps and temperature curves in total – exactly tailored to your application. The application variety is rounded out by the short mix function, e.g. for vortexing as well as interval shaking with flip effect.
The direction of rotation is switchable by the software.
HLC by DITABIS speaks your language: the intuitive menu navigation is optionally in German or English.
Keep the overview over your process at any time: with the detailed information on the display you always have the view over the following values:
- Actual and set temperature
- Actual a. set shaking frequency
- Actual and set time
- Program number, cycle, step
Navigate through the intuitive menu with only five key elements and adjust the 10 parameters to your application – this comfort is unsurpassable.
Parameters for programming
Program no.: 1-9
Number of cycles: 1-9
Program steps: 30
Progress time hours: 0-99 h / infinite
Progress time minutes: 0-59 min
Set temperature: -10°C up to + 135°C
Rise time: 0-99 min
Interval shaking, standstill (pause): 0.0 - 9.9 min
Interval shaking, mixing: 0-9 sec
